Jung FUD 1253 EB Bedienungsanleitung Seite 15

GB
Specifications
Power supply
(no neutral conductor required)
Connected load
- 230 V incandescent lamps
(resistive load, phase cut-off)
- HV halogen lamps
(resistive load, phase cut-off)
- Jung TRONIC transformers
(resistive load, phase cut-off)
or
- Conventional transformers
(resistive load, phase cut-on)
- Mixed loads of the specified types
(Do not combine capacitive with
inductive loads.)
Proper functioning can be guaranteed
only with Jung Tronic transformers or
with conventional iron/copper
transformers
When connecting mixed loads using
conventional transformers, do not exceed
a share in resistive load of 50 % (incandes-
cent lamps, HV halogen lamps).
R,L,C
The symbols used to identify dimmer
loads designate the type oe the electri-
cal behaviour of loads connected to
dimmers:
R = ohmic, L = inductive, C = capacitive
Power attachments
to be connected
Number of extensions :unlimited
Receive frequency
Protective system
Dimensions (LxWxH) :187 x 28 x 28 mm
Temperature range
Recommended cable type for effective
pull relief: H 05 VV-F 3x 1,5
Subject to technical modification.
Please hand these instructions over
to your customer after the installation.
:230 V AC,
50/60 Hz
:50–315 W/VA
:10 max.
:433.42 MHz,
ASK
:IP 20
:approx.
0 °C to +55 °C
Acceptance of guarantee
We accept the guarantee in accordance
with the corresponding legal provisions.
Please return the unit postage paid to
our central service department giving
a brief description of the fault:
ALBRECHT JUNG GMBH & CO. KG
Service Center
Kupferstr. 17-19
D-44532 Lünen
Service-Line: +49 (0) 23 55 . 80 65 53
Telefax: +49 (0) 23 55 . 80 61 65
E-Mail: mail.vka@jung.de
General equipment
Service-Line: +49 (0) 23 55 . 80 65 55
Telefax: +49 (0) 23 55 . 80 62 55
E-Mail: mail.vkm@jung.de
instabus EIB equipment
Service-Line: +49 (0) 23 55 . 80 65 56
Telefax: +49 (0) 23 55 . 80 62 55
E-Mail: mail.vkm@jung.de
GB