Pkm WA8-E1214 Bedienungsanleitung Seite 77

6.2 Error codes
E
RROR CODE
1. The shipping bolts are still
UE
2. The
(Spin)
3. Load is too low.
1. Water tap closed.
2. Water pressure too low.
IE
3. Water inlet hose is frozen.
(water inlet)
4. Filter is blocked.
1. Water
2. Water drain hose is frozen.
OE
3. Water drain hose is blocked.
(water outlet)
4. Water discharge is blocked.
1. Door is not closed properly.
DE
2. Door lock is defective.
(Door)
1. Heater defective.
EE
(appliance
does not heat)
FE
(appliance is
constantly
drawing
water)
LE CE
or
(drum does
not rotate)
If you have checked all items on the above schedule but the problem still exists,
please contact the customer service.
All manuals and user guides at all-guides.com
P
OSSIBLE CAUSE
in the appliance.
appliance
installed and / or adjusted
properly.
drain hose
installed too high.
-
-
( )
S
1. Remove the shipping bolts.
2. Install and / or adjust the
is not appliance properly.
3. Load the appliance properly.
1. Open the water tap.
2. Wait some time.
3. Defrost the water inlet hose.
4. Remove the filters and clean
them.
was 1. Max. height 125 cm.
2. Defrost the water drain
hose.
3. Remove the blockage and
clean the hose.
4. Remove the blockage and
clean the water discharge.
1. Close the door properly.
2. Please contact the customer
service.
1. Switch off and unplug the
appliance, close the water
tap
customer service.
1. Switch off and unplug the
appliance, close the water
tap
customer service.
1. Switch off and unplug the
appliance, close the water
tap
customer service.
77
M
EASURES
and contact the
and contact the
and contact the