Werbung
Verfügbare Sprachen
Verfügbare Sprachen
16 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage the
housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Disconnect the product from the power supply.
2. Clean the product with a dry, fibre-free cloth.
3. Check the rudder linkages and the control functions of the servos on your model regularly. All moving parts should
move freely, but there must be not any slackness in the bearing.
4. The motor should turn easily by hand and the propeller should not be damaged or torn. Replace the worn propeller
with the included replacement propeller or order an original replacement propeller.
5. Cracks or breaks can be repaired with instant glue. However, the instant glue must be suitable for foam materials.
During repair work, always pay attention to the weight and use as little glue as necessary. When repairing on one
side, the model must eventually be balanced around the longitudinal axis. Trim weights must be placed on the
lighter side so that the model is properly balanced.
6. It is not recommended to repair a defective servo or receiver. In this case, it is useful to replace the defective parts
with structurally identical ones.
37
Werbung
