Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2 Introduction
Dear customer,
Thank you for purchasing this product.
If there are any technical questions, please contact:
3 Intended use
This product is an electrically driven model aircraft which is wirelessly controlled via the included remote control. The
model is designed for outdoor use and should be used under weak winds or in calm weather conditions only. The
model aircraft is pre-assembled and is delivered with built-in remote control and drive components.
The product must not become damp or wet.
This product is not suitable for children under 16 years of age.
The model may only be operated by children or adolescents under the supervision of an adult who has the requisite
expertise. Only adults may charge and monitor the flight battery.
If you use the product for purposes other than those described, the product may be damaged. Improper use can result
in short circuits, fires or other hazards.
The product complies with the statutory national and European requirements. For safety and approval purposes, you
must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to third parties
only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
The model is not intended for the attachment of additional loads such as video cameras. Additional weight
and increased air resistance could impair the model's flight characteristics and render it uncontrollable in
the air.
Always follow the safety information in these operating instructions. They contain important information on
how to use the product safely.
You are solely responsible for the safe operation of this model!
4 Product description
The "C129 V2 Helicopter" model is a widely prefabricated RtF (Ready to Fly) model. The fuselage and tail units are
pre-assembled. All components required for drive and control are already built in the model and ready for use. An
easy-to-use 2.4 GHz remote control is used to control the model.
The model is decorated with a colour decal sheet, which is factory applied. The model with three controllable axes can
be assembled quickly without much effort.
The transmitter is powered by 4 AA batteries (alkaline type recommended). The included charger is used to charge
the LiPo rechargeable battery to be used in the model.
22
www.conrad.com/contact
Werbung
