Werbung
Verfügbare Sprachen
Verfügbare Sprachen
13.2 Flight Operation Steps
1. Turn on the transmitter and let the helicopter stay near to the transmitter.
2. Install the aircraft battery in the battery compartment safely and securely and then
start pairing.
3. The lights of the helicopter and the remote-control flash at the same time. Then push
the throttle stick from top to bottom quickly. The remote control makes a ‚DI' sound,
and the indicator lights of the helicopter and remote control are always on, which
means binding successful.
4. Pull the two joysticks to the outer eight angles to start the helicopter. (You can also
press the one-key takeoff button to take off the helicopter directly.)
5. Keep the helicopter head forward and keep safe distance with the helicopter.
6. When manually operating the aircraft to land, please keep the throttle stick at the bottom for 2-3 seconds, and
then release it after the propeller has completely stopped rotating.(This operation is not required when using the
one-key landing function).
Note:
– Beginner should pay attention to the direction of flight. Keep the head forward to avoid causing injury.
– In order to avoid being hit, do not look at the helicopter at hip level when it flies.
– In order to avoid distractions, please confirm without other transmitters at work around.
30
Werbung
