Reely C129 V2 Bedienungsanleitung Seite 35

Pull out the landing gear downwards and press the corresponding holes when installing.
When replacing the receiver, remove the double-sided tape together, align the new receiver with the edge of
the rack and stick it tightly without skewing, and then connect the servo and the motor in the order of the plugs.
Pull out the big gear straight down, pay attention to the direction when installing the new gear, and the axis plane
should be aligned with the plane of the inner hole of the gear.
When removing and replacing the tail rotor, please pay attention to the direction, align the motor shaft and press
it slowly to ensure smooth rotation.
35