ADURO H1 Bedienungsanleitung Seite 73

This cleaning cannot last more than 3 minutes because of the sensor in the door. We recommend that you
use gloves. Open the door to the combustion chamber and use a pliers to move the brazier to the side.
Scrape ash and slag, that has accumulated under the brazier, down through the grate into the ash drawer.
Avoid brushing ash and slag into the auger. Then place the brazier correctly in place and close the door
again.
7.2 Weekly cleaning
We recommend a more thorough cleaning every 4 days carried out on a cold stove. Vacuum thoroughly in
the auger and in the combustion chamber e.g., with Aduro Ash Cleaner.
7.3 Cleaning after approx. 500 hours of pellet operation
If the stove is placed in dusty surroundings, it may be necessary to clean the ventilator. Clean the brazier for
ash and cinders, e.g., with a scraper. Clean the air pathway for electrical igniter for ash and cinders that
might be covering the hole placed on the left side of the tube under the brazier, e.g., using a small, straight
screwdriver.
For further information regarding maintenance of the stove, please go to www.adurofire.com.
7.4 Yearly service visit
The hybrid stove must be inspected within the first year by an Aduro certified professional for cleaning and
adjustment. Hereafter, maintenance must be conducted every other year or for every 2,000 kg pellets burned
from the date of the latest service visit. You are responsible for covering the cost of this yourself.
The chimney must be maintained and swept according to local rules.
7.5 Other cleaning and maintenance
Ashes
Empty the ashpan before it gets completely full. When igniting with wood, you can leave a layer of ashes in
the combustion chamber, because it insulates and makes it easier to light a fire.
Remove the brazier and clean the top auger for ashes with a vacuum cleaner. This is done easiest by
making a "paper ring" of paper roll, which is laid around the opening of the auger. Then, press the vacuum
cleaner muzzle down towards the "paper ring" so it fits tightly. After this, the ashes can be vacuumed up.
Glass
Burning of wet wood, insufficient chimney draft and wrong use of the hybrid stove can result in soot stains on
the glass. They can easily be removed using a damp cloth that you dip in cold ash and rub on the sooty
glass. Special cleaning agents are also available to remove soot from the glass, e.g. the Aduro Easy Clean
pad. The pad neither scratches nor damages the glass, and it can be used multiple times. Water or other
cleaning agents are not necessary.
It is common maintenance to tighten the glass fittings and the hinges shortly after the stove has been
installed.
73