Stahl EC-940-PTZ-HF Serie Bedienungsanleitung Seite 37

11 Instructions for normal
operation
Do not use the wiper if the outside
temperature is below 0°C or in case of ice.
If it is left on, the wiper automatically
disables itself.
The device control can be performed through
different modes.
• Through the user's controls of the web interface (
10.2 Web interface, page 25).
• Through Video Management Software (VMS)
that supports the ONVIF protocol. In this case
the Special controls are implemented using the
auxiliary commands of the ONVIF protocol.
• Through PTZ Assistant software (refer to the
manual of the product).
MNTCMPXHDB_1824_EN
11.1 Special controls
SPECIAL CONTROLS
Action Command
Protocol
HTTP API
Wiper Start
p1
Wiper Stop
p1
Washer
p1
Night Mode On
p1
Night Mode Off
p1
Night Mode Auto –
Reboot the device
p1
Patrol Start –
Autofocus
p1
Relé On –
Relé Off –
Tab. 5 1 Command can be enabled, for further information
contact the support centre null.
ONVIF (auxiliary
command)
tt:Wiper|On
tt:Wiper|Off
tt:Washing Proced
ure|On
tt:IRLamp|On
tt:IRLamp|Off
tt:IRLamp|Auto
–
tt:Patrol|On
tt:Autofocus|On
tt:Relay1|On
tt:Relay1|Off
35