Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10.2.4 Camera Settings Page
On the menu item, it is possible to set the camera
parameters.
Some fields are displayed dynamically, depending on
the system configuration.
• Zoom: Configuration parameters.
• Digital Zoom: It allows enabling or disabling
the digital zoom. (in addition to the optical).
• Focus: Configuration parameters.
• Focus mode: MANUAL or AUTO - PTZ TRIGGER
(at the end of each movement, the camera auto-
focuses the image).
• Exposure: Configuration parameters.
• Exposure Mode: The parameter configures the
exposure algorithm. The relevant control fields
are displayed based on the mode selected.
• Shutter (s): The parameter sets the speed of the
shutter.
• Iris: The parameter sets the Iris.
• Exposure Compensation: The parameter
enables correction of scene brightness.
• Compensation Value: The parameter defines
the correction of scene brightness value.
• Auto Slowshutter: If set to On, the speed of the
shutter slows down when light decreases. The
minimum value is set by the Slowshutter Level
(s) parameter.
• Slowshutter Level (s): The parameter defines
the minimum value for the speed of the shutter
when Auto Slowshutter is set to On.
• Gain (dB): The parameter defines the Gain
value.
28
• White Balance: Configuration parameters.
• Mode: It allows configuring the white balance in
automatic or manual. When manual mode is set,
intensity can be adjusted of the primary colours
red and blue.
• Wide Dynamic Range: Configuration parameters.
• Wide Dynamic Range: This parameter enables
activation of the function to improve the
contrast between the luminous zones and the
shadow zones.
• WDR Level: The parameter specifies the level of
compensation.
• Advanced Settings: Configuration parameters.
• Noise Reduction 2D: The parameter specifies
the level (in 2D mode) of noise reduction to
provide clearer images.
• Noise Reduction 3D: The parameter specifies
the level (in 3D mode) of noise reduction to
provide clearer images.
• Sharpness: The parameter sets the level of
contour sharpening.
• Defog Mode: The parameter enables the
function that enables improved vision when the
area around the subject is foggy or with little
contrast, showing the subject more sharply.
• Day/Night Hysteresis: Switching hysteresis
Day/Night/Day if Day/Night mode control is
Automatic.
MNTCMPXHDB_1824_EN
Werbung
