Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Options: Configuration parameters.
• Saturation: The parameter sets the fullness
value of the colours of the image.
• Contrast: The parameter sets the contrast value
of the image.
• Brightness: The parameter sets the brightness
value of the image.
Camera Default: The button resets the camera
settings to default configuration.
Fig. 32
10.2.5 Network Page
For the device to operate correctly, using
the NTP server, the date and time of the
internal clock and those of the associated
VMS must be synchronised.
From menu entry it is possible to change the network
setting of product. It is possible to decide whether
the device requires an address assigned statically,
dynamically with DHCP or self-generated. The device
supports the Internet Protocol (IP) in version 4 and 6.
MNTCMPXHDB_1824_EN
From the same page it is possible to configure 2 DNS
and decide which mechanisms must be enabled
to automatically identify the devices in the local
network.
IP version: The IP version can be selected (IPv4 or
Dual IPv4/IPv6).
NTP Server: It is also possible to specify if the device
needs to be synchronised with an external NTP
(Network Time Protocol) server.
• DISABLED: Select this option if you do not wish to
synchronise date and time of the device.
• STATIC: Select this option if you wish to
synchronise date and time of the device with
those of the NTP (Network Time Protocol) server
specified by the static address.
• DHCP: Select this option if you wish to synchronise
the date and time of the device with those of an
NTP server (Network Time Protocol) indicated by
the DHCP server.
PC Sync: This allows you to synchronise the date and
time of the product with that of the PC that you are
using (you need to re-execute the command after
each unit switch on-off cycle).
Accept Untrusted NTP Server: If the parameter
is active, the device accepts untrusted servers and
networks.
Fig. 33
29
Werbung
