Stahl EC-940-PTZ-HF Serie Bedienungsanleitung Seite 34

• Movement Limits
• Pan Limits: Enables the limits of Pan.
• Pan Start: Sets the start limit of Pan.
• Pan End: Sets the end limit of Pan.
• Tilt Limits: Enables the limits of Tilt.
• Tilt Start: Sets the start limit of Tilt.
• Tilt End: Sets the end limit of Tilt.
• Position Check
• Static Control: Enables control of the position
only when the pan & tilt is stopped
• Dynamic Control: Enables control of the
position only when the pan & tilt is moving
Fig. 38
32
10.2.11 Preset Tour Page
On the menu item, it is possible to define and set
parameters for the Preset Tour and Preset.
For this version of the device, a single Preset Tour
called Patrol is available.
• Start Preset Tour/Stop Preset Tour
Fig. 39
Fig. 40
MNTCMPXHDB_1824_EN