Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10.2.2.6 Home management
• Back to Home/Save Home position/Reset Home
position: The Home position does not coincide
with any Preset. The Home position is a stand-
alone setting that can be updated but can not be
deleted.
Fig. 28
10.2.2.7 Preset Management
• Scan Preset/Set Preset/Remove Preset
Fig. 29
MNTCMPXHDB_1824_EN
• Start Preset Tour: To start a Preset Tour, at least
one Preset Tour must be defined and at least
one Preset position must be saved. The speed of
movement and waiting times can be configured on
the Preset Tour page. For this version of the device,
a single Preset Tour called Patrol is available.
Fig. 30
For further information refer to the relative
chapter (10.2.11 Preset Tour Page, page 32).
10.2.3 Device Parameters Page
From menu entry Device Parameters it is possible to
set the name of the device and view other additional
information.
Fig. 31
27
Werbung
