EuroLite Mirror Ball 30 cm + Motor MD-1515 Bedienungsanleitung Seite 12

The motor and the mirror-ball must never be installed over areas where persons may be seated or walk by.
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
This device must never be operated or stockpiled in sourroundings where splash water, rain, moisture or fog
may harm the device. Moisture or very high humidity can reduce the insulation and lead to mortal electrical
shocks. When using smoke machines, make sure that the device is never exposed to the direct smoke jet
and is installed in a distance of 0.5 meters between smoke machine and device. The room must only be
saturated with an amount of smoke that the visibility will always be more than 10 meters.
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
Never use the device during thunderstorms. Over voltage could destroy the device. Always disconnect the
device during thunderstorms.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, crash etc.
DESCRIPTION OF THE DEVICE
Features
Mirror ball motor
Suitable for driving mirror balls up to a maximum weight of 4 kg • This weight corresponds with a diameter of
40 cm for the EUROLITE mirror balls • The maximum load always means the mirror ball weight including the
mirror ball chain and the fixation material • 1,5 rotations per minute • Ready for connection with power plug •
For professional use, e.g. in discotheques and in public places, the EN DIN 15560 norms have to be
considered • The motor always has to be installed with a secondary safety attachment • Before taking into
operation for the first time, the installation has to be approved by an expert
Safety features
• Rugged construction with steel housing for long operation
• High stability due to massive motor axle
• Mechanic fall safety against axle loosening inside the motor
• Approved load with 10-fold testing weight
• Additional attechment eyelet for secondary attachment of the load
• EUROLITE safety rotary motors comply with the safety norm EN 292 and safety regulation BGV C1
(Germany)
• Quality management for testing every production charge
12/29 00026908.DOC, Version 2.0