Stihl WP 300.0 Gebrauchsanleitung Seite 19

4 Safety Precautions
3.2 Components for Connecting
the Hoses
1 Connecting piece
The connecting piece is used to connect a
hose.
2 Seal
The seal seals the connecting piece.
3 Union nut
The union nut secures the connecting piece
to the water pump.
4 Clamp
The clamp secures a hose to the connecting
piece.
5 Suction strainer
The suction strainer filters the water taken in.
3.3 Symbols
The symbols can be on the water pump, the
engine or the oil filler neck and have the follow‐
ing meaning:
The fuel cock is opened and
closed by moving the lever.
The choke lever must be acti‐
vated when starting a cold
engine.
Note the engine oil capacity.
Read, understand and keep the
instruction manual.
The engine must be filled with
engine oil before starting.
This symbol indicates the throt‐
tle lever.
0478-701-9901-E
4 Safety Precautions
4.1 Warning Symbols
The warning symbols on the water pump have
the following meaning:
Follow the safety instructions and their
measures.
Read, understand and keep the
instruction manual.
Wear hearing protection.
Do not breathe in exhaust fumes.
Do not touch hot surfaces.
Do not refuel when the engine is run‐
ning or heated to a high temperature.
Maintain distance from objects
and keep third parties away.
4.2 Intended Use
The STIHL water pump WP 300.0 is used to
pump fresh water to a maximum height of 33 m
and from a maximum depth of 7 m. The water
pump must only be used as a stand-alone unit.
The STIHL water pump WP 300.0 must not be
used for the following applications:
– Pumping petrol, oil, thinners, solvents and
similar materials
– Pumping acids, alkalis, bases and similar
materials
– Pumping liquid food products
– Pumping salt water
– Pumping water with a temperature above
40 °C.
NOTICE
■ Local regulations and instructions govern the
extraction of water from above-ground bodies
of water.
► Observe and comply with local regulations.
English
19