ANSMANN BC 6-12V Bedienungsanleitung Seite 17

4.2. DISPLAY SYMBOLS
E
A. Charging of a 12 V battery (lead-acid and gel batteries).
B. Charging of a 12 V AGM battery / winter mode (for lead-acid and gel batteries).
C. Charging of a 12 V battery with a reduced charging current of 1 A (lead-acid, AGM
and gel batteries).
D. Charging of a 12 V battery (LiFePO4, LFP).
E. Charging voltage in volts / battery defective (BAD) / fully charged (FUL) / short
circuit at terminals or connected with the wrong polarity (Err)
F. Charging of a 6 V battery (AGM, lead-acid and gel batteries).
G. Restoration of the charging capacity of discharged lead-acid batteries with an
increased charging voltage or easily deep-discharged batteries
H. Voltage supply / power supply mode (only suitable for 12 V!)
I. Charge status of the battery in percent (1 bar = 20%) and charging process
• Bar is lit = the battery has achieved the charge status
• Bar in the battery symbol is blinking = the battery is being changed to the next
charge status.
• All the bars are lit = the battery is fully charged
5. CHARGING PROGRAMS
5.1. STANDARD
In order to switch between the standard charging programs, just press the "Mode"
button briefly. The charger stores the most recently selected standard charging
program. This will be automatically selected after the plug has been re-inserted into
the socket.
A. 12 V STD: charging program for lead-acid and gel batteries. After the charger is
used for the first time, 12 V STD appears in the display.
B. 12 V AGM/C: charging program for AGM batteries and recommended charging
program in cold weather (-20°C - +5°C ambient temperature) for normal lead-acid
batteries.
C. 12 V M: charging program for batteries with a small capacity (see "Technical data")
and for the maintenance charging of all the batteries named under 3. "Proper
intended use".
D. 12 V LFP: charging program for lithium iron phosphate batteries (LiFePO4 and LFP).
A
B
F
G
DE | EN | FR | ES | PT | SE | IT | NL | DK | FI | NO | PL
C D
H
I
17