Panasonic TY-CE42PS1 Installationsanleitung Seite 7

9. Adjust the ceiling unit's angle.
Connecting pipe
10. Gather the cables.
Removing the display
Fixing screw (M5)
Angle
adjustment
hole positions
0° (vertical)
5°
10°
15°
20°
25°
30°
Cable tie
Cable
③
①
Insulating
②
spacer
Matsushita Electric Industrial Co., Ltd
Central P.O. Box 288, Osaka 530-8692, Japan
This ceiling unit can be placed in 7 angles from 0°
to 30° in 5° increments. The factory setting is 0°.
If you wish to change the angle, remove the angle
adjustment screws from the connecting pipe and
adjust the angle adjustment holes to the desired
position. Then reinsert the screws.
• Gather the cables connected to the
terminals on the back of the display and
fix in place with a cable tie.
Cable tie
Cable
Caution
• When removing the display, first return the ceiling
unit angle to 0°.
1. Remove the two fixing screws (M5) at
the left and right sides of the ceiling
unit.
2. Lift the lower part of the display,
pull outward
and lift upward.
Printed in Japan
7
MS0600Y1