Kärcher IV 60/24-2 W Bedienungsanleitung Seite 15

Emptying the vacuuming material
container
To avoid too much filling of the vacuuming
material container, you need to check it
regularly depending on the type and vol-
ume of the sucked in material.
Switch off the appliance and secure it
using the parking brake at the guide
roller.
Open the vacuuming material container
upward at the lock (see figure).
Pull out the vacuuming material con-
tainer from the appliance using the han-
dle that has been provided for the
purpose.
Note
The vacuuming material container needs to
be emptied if it is full until about 3 cm below
the upper rim.
Empty the vacuuming material contain-
er and insert it back into the appliance
using the reverse sequence.
Maintenance and care
Danger
Risk of injury by inadvertent startup of ap-
pliance and electrical shock.
First pull out the plug from the mains before
carrying out any tasks on the machine.
Warning
Safety devices which are designed to pre-
vent dangerous situations must be serviced
regularly. This means that the safety func-
tions of the devices must be subjected to a
thorough inspection, e.g. checking for
leaks and damage to the filter, and testing
the monitoring function. This must be car-
ried out by the manufacturer or a trained
person at least once a year.
No outside help is required for carrying out
basic maintenance and cleaning.
The outer surface of the device and the in-
side of the container should be cleaned
regularly using a damp cloth.
Changing/ replacing filter
Switch off the appliance using the ON/
OFF switch and separate it from the
mains.
1 Handle for filter cleaning
2 Spring
3 Fastener for filter dedusting
4 Suction head cap
Tilt the fastener for filter dedusting to-
wards the side.
Unscrew the handle for filter shake-off.
Open both the suction head caps.
– 5
EN 15