Pepperl+Fuchs UCC 50GK Serie Kurzanleitung Seite 2

Using Your Sample
Ultrasonic Sensor
This quick start guide will help you set up and test your
sample ultrasonic sensor from Pepperl+Fuchs.
The sensor uses ultrasonic pulses to measure the distance
to nearby objects. It communicates via one of three sensor
outputs: UART, PWM, or LIN bus. The following pages will
show you step-by-step how to get started.
For additional support and information, contact your
local Pepperl+Fuchs representative or visit
www.pepperl-fuchs.com/pf-ucc50gk
2