Cam Title Menu - Eneo HDB-2000MIR720 Montage- Und Betriebsanleitung

6.8.1 CAM TITLE menu

To enter CAM TITLE menu, press at MAIN > SPECIAL > CAM TITLE > ON.
Up to 5 characters from the character table can be input.
Use , , , to move cursor(Blink character is on the cursor position) in the character table.
Press to select and the selected character will be input and displayed on CAM TITLE input line.
To move the input position CAM TITLE input line, press on
To clear CAM TITLE input line, press on CLR on command line.
To set the location of CAM TITLE to be displayed on the video, press on POS on command line and then menu
disappears and CAM TITLE will be displayed on the video.
Use , , , to locate CAM TITLE at the proper position and press to fix.
Menu will appear again.
To finish CAM TITLE menu, press ● on RET on command line.
Command line
CAM TITLE input line
5