Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EGEA TECH
Do not tamper with the data plate
in any way.
ATTENTION
In the event of a request for information or technical assis-
tance, it is necessary to specify, in addition to the model and
type of machine, also the relative serial number.
4.2
IDENTIFICATION PLATES OF THE MAIN
ELEMENTS
The labels of all components not built directly by the manu
facturer are directly applied to the components themselves,
in the points where the respective manufacturers originally
placed them.
4.3
DESCRIPTION OF THE SYMBOLS USED IN
THE MANUAL AND ON THE PACKAGING
The symbols shown in the following table can be used in whole
or in part in this manual and accompanied by their description.
Some of these may be affixed to the device and/or its pack-
aging.
Symbol
Definition
SYMBOLS USED IN THE MANUAL
RISK OF ELECTROCUTION.
Any intervention that involves the removal of
covers or panels on which this symbol is af-
ATTENTION
fixed must be carried out exclusively by quali-
DANGER
fied technicians.
GENERIC DANGER.
Symbol used to identify important warnings for
the safety of the operator and/or the device.
ATTENTION
GENERIC OBLIGATION.
Symbol used to identify information of particu-
lar importance.
OBLIGATION
OBLIGATION.
Symbol used to identify the specific obligation
of grounding connection.
OBLIGATION
OBLIGATION.
Symbol used to identify the obligation to read
this instruction manual before any type of in-
OBLIGATION
tervention on the device.
200 HT - 260 HT
cod. 3540000420 - Rev. 03 - 09/2023
Symbol
Definition
GENERIC PROHIBITION.
Symbol used to identify the prohibition of the
prescribed description.
PROHIBITION
WEIGHT.
Symbol that identifies the weight of the ma-
chine. If present on the packaging, it indicates
the weight of each package.
RECYCLING / DISPOSAL.
Symbol that identifies the recovery and recy-
cling of materials.
PROFESSIONAL WASTE
Indicates that this product must not be treated
as household waste but must be delivered to
the appropriate collection point for the recy-
cling of electrical and electronic equipment
(DIRECTIVE 2012/19/EU)
VISUAL INSPECTION
Symbol that identifies visual inspection.
MANUAL CLEANING
Symbol that identifies manual cleaning.
MINIMUM NUMBER OF OPERATORS
EMPLOYED
2x
Operations that must be carried out by at least
two people.
SYMBOLS USED ON THE PACKAGING
POSITIONING DIRECTION
Affixed to the packaging, it indicates the
correct orientation.
PROTECTION FROM WEATHER
CONDITIONS
Affixed to the packaging, it indicates to
protect from rain and atmospheric agents.
Store in a dry place.
FRAGILE
Affixed to the packaging, it indicates to handle
it with care in order to avoid any breakage of
the contents.
LIMITATION OF PACKAGING OVERLAP
Affixed to the packaging, it indicates not to
overlap the packaging.
EN
161
Werbung
