Herunterladen Diese Seite drucken

Axkid MODUKID BASE Bedienungsanleitung Seite 15

Vorschau ausblenden Andere Handbücher für MODUKID BASE:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 18
Installing AXKID MODUKID INFANT 2 on the
base
Pull the seat release handle (E) until it locks into its extended position (see F6). Place the car seat in position on top of the AXKID
6a
MODUKID BASE and push the car seat down into the AXKID MODUKID BASE until the seat release handle (E) clicks into
locked position and the set atachment indicator shows green. The bease attachment hooks (C) should now have attached to
the car seat in both front and rear.
Ensure that the AXKID MODUKID INFANT 2 is not in contact with any adjacent vehicle seat and that the support leg is firmly
7a
clamped to the floor and that the support leg installation buzzer (O) has stopped buzzing. Also make sure that the handle is in
position A1 (see AXKID MODUKID INFANT 2 manual for further instructions)
IMPORTANT:
See your AXKID MODUKID INFANT 2 manual for full instructions on how to install the product and how to buckle your child in the seat.
Installing AXKID ENVIROKID on the base
Pull the seat release handle (E) until it locks into its extended position (see F6). Place the car seat in position on top of the AXKID
6b
MODUKID BASE and push the car seat down into the AXKID MODUKID BASE until the seat release handle (E) clicks into
locked position and the seat attachment indicator (D) shows green. The base attachment hooks (C) should now have attached
to the car seat in both front and rear.
Ensure that the AXKID ENVIROKID is not in contact with any adjacent vehicle seat and that the support leg is firmly clamped to
7b
the floor and that the support leg installation buzzer (O) has stopped buzzing.
IMPORTANT:
See your AXKID ENVIROKID manual for full instructions on how to install the product and how to buckle your child in the seat.
The Axkid module system
The Axkid Module system consists of:
AXKID MODUKID BASE – Base for easy installation in vehicles with ISOFIX connection points.
AXKID MODUKID INFANT 2 – Infant car seat for children between 40-75cm and up to 13kg.
AXKID ENVIROKID – Rear-facing car seat for children between 61-105cm and up to 18kg.
WARNING: Only install the AXKID MODUKID INFANT 2 or the AXKID ENVIROKID on the AXKID MODUKID BASE. Trying to use other
products on AXKID MODUKID BASE can result in serious injury in the event of a collision.
15
EN

Werbung

loading

Diese Anleitung auch für:

Modukid infant 2Envirokid