Maintenance; Resin Change - elysator PUROTAP compenso Betriebsanleitung

44
11
Briefl y press this key once to select the throughput indicati on in litres per
minute (l/min) or gallons per minute (GPM). Press the key for approx.
3 seconds to reset the total throughput volume ("JOB") to 0. We recommend
rese� ng the "JOB" to 0 aft er every resin change to enable esti mati ng and
comparing the residual capacity of the ion exchange resin. The TOTAL litres
cannot be reset to 0.

6. Maintenance

6.1. Resin change

PUROTAP® compenso 2
2
3
1
1. Close ball valves, unscrew the canister
2. Dispose of spent resin with household waste, fi ll in new resin
3. Screw on the canister, reset the combined meter to "0" (see chapter 5.2.)
PUROTAP® compenso 12/25/50