Performance Data; Operation - elysator PUROTAP compenso Betriebsanleitung

40

4.3. Performance data

PUROTAP®
Annual
requirement
Capacity
at 1° dH
Capacity
at 1° fH
Flow rate
Pmax - Tmax
Pmax - Tmax
5. Operati on
5.1. Connecti on
5.1.1. Use with heati ng system fi ll hose
1. Flush the cartridge
Open the valves. Connect a hose from the appliance to the drinking water
supply. Route a further hose from the connecti on on the combined meter
side to a bucket. Flush the cartridge with approx. 10 l of water.
2. Refi ll the heati ng system
Now remove the hose from the bucket and connect it to the heati ng
system. Fill the heati ng system.
3. Close valves and remove hoses
• Permanent connecti on via a heati ng system fi ll hose is not
• Unsupervised use is not permitt ed.
• Where DIN EN 1717 applies (Germany), observe the regulati ons
• The ion exchange resin must not enter the heati ng system. Do
compenso 2
< 250 l
2.5 m³
4.5 m³
2.5 l/min
permitt ed.
regarding system separati on.
compenso 12 compenso 25 compenso 50
< 2500 l < 5000 l
20 m³ 40 m³
35 m³ 70 m³
10 l/min 20 l/min
6 bar up to 25 °C
4 bar up to 60 °C
7
< 10,000 l
80 m³
140 m³
20 l/min