Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OVERHEATING PROTECTION
This heater is equipped with an overheating protection, which automatically switches off the
device in case of overheating. For example: due to the complete or partial clogging of the
ventilation openings. In this case, unplug the power plug from the wall outlet, wait about 30
minutes for the device to cool down, and remove the item that is blocking the vents. Then
turn it back on as described above. The device should now work normally. If the problem
persists, contact customer service.
CLEANING & MAINTENANCE
• Unplug the device from power before cleaning or maintaining it.
• For cleaning, it is recommended to use a soft, damp cloth and a neutral detergent. Do not
use abrasive cloths or devices that could affect the appearance of the device. Make sure
the hot air outlet and vent are free of dust and dirt.
When cleaning, be careful not to touch the heating elements.
• To open the filter on the back for cleaning, press the top of the plastic net on the back.
• Disconnect the device from the power supply in the event of a malfunction and/or
malfunction and contact an authorized repair shop.
SPECIFICATIONS
Power Supply: AC 220-240V~50Hz
Power consumption: 2000W
NOTE: Due to constant improvements, the design and technical specifications of the product
may differ slightly from the unit shown on the packaging.
Environment
Meaning of the crossed-out garbage can
Do not dispose of electrical appliances with household waste, but collect them
separately. Information on the available collection systems can be obtained from
your municipal administration.
When electrical appliances are disposed of in landfills, hazardous substances can
enter groundwater and the food chain, damaging your health and well-being.
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany
13
www.eshopping.de
Werbung
