Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7
Gluing the unions onto the lid:
The transparent union is joined to the waste outlet,
the black union to the inlet and the 3 piece union to
the outlet on the 'pump' side.
Caution: avoid using excess glue,
this could damage the ball in the valve.
9
Carefully pour the sand into the filter and,
using your hand, spread it out evenly.
10
Mounting the pressure gauge:
Working from the top, put the o-ring into the
groove in the lid.
FILTRATION BWT myPOOL
8
Check that the collector plate is correctly
positioned at the bottom of the filter tank.
Insert the collector pipe (topped with its
cap) into the hole in the middle of the
collector plate.
P-MGI-
400
QUANTITY
20 Kg
OF SAND
QUANTITY
OF SAND
11
10
Orient the pressure gauge and place it in
its housing.
2019/05 - Indice de révision : H - Code : 26660
P-MGI-
P-MGI-
400 EH
500
25 Kg
50 Kg
0.6/1.25
15/40
Werbung
