Assa Abloy ZI IKON eCLIQ Bedienungsanleitung Seite 43

A
At tention!
Replace the battery within 30 s: Stored data is kept for 30 s. Time-re-
stricted authorisations are lost after the time has expired, for example.
A new battery must be inserted within this time span (Pic. 7, page 138).
1 Loosen the battery cover:
∙ Press and hold the locking tab on the battery cover.
∙ Rotate the battery cover 90° anti-clockwise.
2 Note the alignment of the battery cover based on the mark.
3 Remove the cover.
4 Pay attention to the correct polarity of the battery and insert a new
battery.
5 Fit the battery cover in place again with the alignment in which it was
removed.
6 Turn the battery cover 90° clockwise until the cover engages slightly.
Key
EN
43