Sony SMS-1P Bedienungsanleitung Seite 3

English
Features
• Professional q uality inputs with high handling
capacity (Balanced terminal +22 dB, Standard
and Pin terminals +8 dB).
• Allows mixing Oftwo different input sources.
• Magnetically shielded design allows placement
near display monitors, TVs, etc.
• Full range speaker and wood cabinet designed
for high fidelity.
• Beautiful front panel finished in synthetic
marble.
This speaker was designed as a reference for use
in recording studios to provide an accurate
reproduction of the mix balance. In order to
convey the full realistic expression and power of
the artist while maintaininga suprememusical
charm, we've carefully considered each of the
individual parts aswell aseveryinch of the
circuit board.
We areconfident you'll enjovthis unique speaker
both in and Out Of the stud10.
Cautions regarding
usage
• Be sure to turn the volunme to "O" when
switching the Of the input source on and
off.
• Remove the protective cover after vou have
connected the speaker and placed it in its final
position.
Be sure to remove
protective cover before
using the speaker.
• 00
• When lieteningat largevolumes,we
reccomend keeping the sound at a level where
it does not distort.
• DO not take apart or the enclosure, it
may damage the speaker.
• When moving the speaker, be sure to attach the
supplied protective cover _
If it still persists...
Check that there is no other
magnetism* near the TV set. Any other source Of
magnetism can cause color irregularity due to an
interaction with the speaker.
* Examples of sources of magnetism: Rack,
magnets attached to secure the doors of the TV
stand, health tools, magnets used with a toy,
etc.
On installation
• Do not install the speaker near heat sources
such as radiators or air ducts, or in a place
subject to direct sunlight, excessive dust,
mechanical vibration
• Good ventilation is essential to prevent internal
heat buildup in the speaker. Placethe speaker
in a location with adequate air_circulation. Do
not place the speaker on a soft surface or too
close to a wall as this may obstruct the
ventilation hole on the back.
On cleaning the cabinet
Clean the cabinet with a soft cloth lightlv
moistened with water, DOnot use any type Of
abrasive pad, scouring powder or solvent such as
alcohol Or benzine.
If you haveany questionsor problems
concerning vour speaker that is not covered in
this manual, pleaseconsult your nearest S ony
dealer-
the
source of
or shock.