Husqvarna DS150 Bedienungsanweisung Seite 5

Drill stands
DS150
• The stand is for drilling in ceilings, walls and floors.
• The baseplate is made of aluminium making it very
light in weight. It has an inbuilt vacuum plate.
• The column can be tilted 0-60°.
• The stand is fitted with a collar.
• The feed handle can be used to loosen and tighten the
collar, adjust the adjustment bolts in the baseplate
and to adjust the angle of the column.
Accessories
• Gear box
• Wheel set
• VP 200 Vacuum pump
All manuals and user guides at all-guides.com
PRESENTATION
DS250
•
•
•
•
•
•
•
Accessories
•
•
The stand is for drilling in ceilings, walls and floors.
The baseplate is made of aluminium making it very
light in weight. It has an inbuilt vacuum plate.
The column can be tilted 0-60°.
The drill stand is equipped with a quick connection
plate for the drillmotor.
The wheel kit is removable.
The feeder housing's transmission is adjustable. The
higher gives 2.25:1 and the lower, 1:1.
Feed lever can be used to adjust base plate leveling
screws and set desired column tilt.
Collar to fit to the quick mounting bracket
VP 200 Vacuum pump
–
English 5