BabyGo Move 360 Montageanleitung Seite 26

INSTALLING METHOD FOR ISOFIX ATTACHMENT
Notice: Child safety seats can also be used with the ISOFIX attachment guider.
Notice: If your car seat can adjust the angle, pls adjust the car seat angle to the
appropriate position, it will be more convenient for ISOFIX attachment installation.
The installation is more convenient, please clip the ISOFIX attachment guide on the ISOFIX
attachment anchor point on the ISOFIX attachment fixed point of the automobile, and the
make notch faces upward
1.
18
Figure 19) at the same time, then push ISOFIX attachment
out.
19
2.
is stuck on both sides, and hear click.When the ISOFIX
is locked, pls push the child safety seat vigorously in the
direction of the arrow to make it t the back of the car
seat ( gure 21).
20
2.Grab the child seat with both hands
two ISOFIX into the ISOFIX guider un
stuck on both sides, and hear click
is locked, pls push the child saf
21
the direction of the arrow t
the car seat (figure 21).
50
Press ISOFIX attachment lock released button and
ISOFIX attachment 2nd lock button (as shown in
button (as shown in F
Grab the child seat with both hands, then push the
two ISOFIX into the ISOFIX guider until the ISOFIX
time, then push ISOFIX
REMOVE ISOFIX ATTACHMENT AND HIDE THE SUPPORT LEG
1.
23
Removing the ISOFIX attachment: Press the „ISOFIX
attachment unlock button", and hear „click" sound,
ensure that both sides of the ISOFIX attachment are unlo-
cked, then remove the seat
Notice: ISOFIX attachment is unlocked correctly only
when the left and right ISOFIX indicator show red.
2.
Hide the support leg: Press the suppor-
ting leg adjustment button and pull the
Support leg up
MOVE 360
DE
EN
FR
NL
24
1.P
butt
51