BabyGo Move 360 Montageanleitung Seite 21

FORWARD FACING + ISOFIX + 3 POINT BELT
Installing the car seat forward facing position by using ISOFIX attachment + 3-point seat
belt (suitable for children height from 100-150cm)
1.
Remove the 5-point safety belt sys-
tem before placing the child in this
way (method 4-8)
2.
Fasten the car seat through ISOFIX
attachment and ISOFIX attachment
anchor points on the vehicle seat according
to the method 4-9.
3.
Place the child seat on the vehicle
seat and adjust the seat to the appro-
priate position (method 4-4).
er seat
40
4.
The vehicle seat belt passes through
the belt guider and pass the child's
shoulder
5.
Vehicle seat abdominal belt through
the belt guider and pass the child's
pelvis
6.
Fasten your car seat belt
The 100-150cm I-Size Booster seat cannot use
the Support leg.
FORWARD FACING + 3 POINT BELT
Use 3-point seat belt to install the child safety seat in forward facing position
(Suitable for children height from 100- 50cm)
1.
Remove the 5-point safety belt sys-
tem before placing the child in this
way (method 4-8)
2.
Place the child seat on the vehicle
seat and adjust the seat to the appro-
priate position (method 4-4).
3.
The vehicle seat belt passes through
the belt guider and pass the child's
shoulder
er seat
MOVE 360
4.
Vehicle seat abdominal belt through
the belt guider and pass the child's
pelvis
5.
Fasten your car seat belt
The 100-150cm I-Size Booster seat cannot use
the Support leg.
DE
EN
FR
NL
41