WorkPro W125108A Bedienungsanleitung Seite 7

cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into account the
working conditions and the work to be performed. Use of
the power tool for operations different from those intended
could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and free

from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
5) Service
Have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.
6) Battery tool use and care
a. Ensure the switch is in the off position before inserting
battery pack. Inserting the battery pack into power tools
that have the switch on invites accidents.
b. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
c. Use power tools only with specifically designated battery
packs. Use of any other battery packs may create a risk of
injury and fire.
d. When battery pack is not in use, keep it away from other
metal objects like paper clips, coins, keys, nails, screws, or
other small metal objects that can make a connection from
one terminal to another.
Shorting the battery terminals together may cause burns or
a fire.
e. Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, flush
with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or burns.
ADDITIONAL SAFETY INSTRUCTIONS FOR THE CHARGER
Your WORKPRO tool with Lithium Ion batteries may only be
charged with the specific designed WORKPRO Lithium Ion
battery charger purchased with the tool.
IT IS DANGEROUS TO USE ANY OTHER BATTERY CHARGER
TO CHARGE YOUR TOOL. Do not attempt to charge the battery
pack with any other charger than the one supplied.
Before using the charger, read all the instructions, labels and
cautionary markings on the charger and battery pack as well
as the instructions on using the battery pack.
Do not use the charger if it has been subjected to a heavy
knock, dropped or otherwise damaged in anyway. Take the
charger to an authorised service centre for a check or repair.
Do not disassemble the charger. Opening or removing covers
may expose you to dangerous voltages or other risks.
Incorrect reassembly can cause electric shock when you use
the tool or charger again. Take the charger to a power tool
repair centre when service or repair is required.
GB
DANGER. If the battery pack is cracked or damaged in
any other way, do not insert it in the charger.
Do not plug anything other than your WORKPRO tool into the
charger, as other objects may touch dangerous voltage points
or short out parts, which could result in fire or electric shock.
Do not place the tool or charger on an uneven surface, as a
fall may cause serious damage.
Never place the tool or charger near or over a heat source
such as a radiator or heater.
Do not operate the charger in a cabinet or other enclosure
unless proper ventilation is provided.
Use the battery charger indoors only.
WARNING. Do not allow any liquid to come into contact
with the charger. There is a danger of electric shock. Do not
position the tool or battery charger near water; for example,
near a sink, wash bowl or toilet. Do not spill liquid of any kind
on the tool or charger. Doing so may short out parts, Causing
damage to the product and creating the risk of fire or electric
shock.
To reduce the risk of an electric shock, unplug the charger from
the power supply before attempting to clean it. To clean tool or
charger, wipe with a damp cloth. Use of any other cleaners is not
recommended.
Do not place any object on to, or allow anything to rest on the
charger.
Make sure that the charger cable is positioned where it will
not be stepped on, tripped over or otherwise subjected to
damage or stress. Keep the lead away from operating
machinery.
Do not pull on the lead of the charger to disconnect it from the
mains power socket.
Do not use an extension cord unless it is absolutely necessary.
The use of an improper extension cord could cause the risk of
fire, electric shock or electrocution.
Never attempt to connect two chargers together.
Do not charge batteries or use the tool and battery pack in
locations where the temperature may be below 40°F(4°C) or
exceed 104°F(40°C) such as alongside sheds or metal
structures.
If you wish to charge a second battery pack, unplug the
charger from the mains supply and leave it for at least 15
minutes. After this time you can charge a second battery pack.
ADDITIONAL SAFETY INSTRUCTIONS RELATED TO THE
BATTERY PACK AND BATTERY SAFETY
Use only the WORKPRO batteries supplied with the WORKPRO
Tool or WORKPRO-approved replacements.
Do not use the battery to power any device other than the
WORKPRO tool it was sold with.
Charge the battery only with the WORKPRO charger supplied
with the tool or WORKPRO-approved replacements and
according to the instructions in the WORKPRO Instruction
Manual.
6