Philips HF8431 Bedienungsanleitung Seite 10

EnglisH
10
Charge the massager when the light ring
starts flashing slowly to indicate that the battery is
almost empty.
1 Make sure that all parts (massager and charger)
are dry.
2 Insert the small plug into the charger and put
the adapter in the wall socket.
3 Place the massager on the charger. It only
fits properly on the charger with the buttons
facing up.
The massager switches off automatically when you
place it on the charger.
, The massager slowly vibrates for a few seconds
to get into the correct position for optimal
charging.
Note: Make sure the pre-warming function is switched
off when you charge the appliance (see chapter
'Preparing for use').
Note: The charger does not work when the massager is
placed incorrectly.
, During charging the light ring flashes.
Note: When you charge the massager for the first
time or after a long period of disuse, it may take a
few minutes before the light ring starts flashing. This is
normal
Note: The appliance may produce a smell the first few
times you charge it. This is normal.The massager will be
fully charged after about 4 hours and up to 5 hours of
exploring together are awaiting you and your partner.
, When the battery is fully charged, the
light ring goes out.