Sunny Health & Fitness P2030 Bedienungsanleitung Seite 10

1
1. Remove the Meter (No. 10) from Main Frame (No. 1). Then disconnect the link wire of
Inductor (No. 49) with the Meter (No. 10).
2. Remove the plastic cap from the back of Meter (No. 10).
3. Insert the battery and ensure that the positive side of the battery, which is labeled with a +
sign, is facing outward as shown in diagram above.
4. Put the plastic cap back onto the battery seat.
5. Insert the link wire of Inductor (No. 49) into the jack hole on the back of Meter (No. 10).
6. Attach the Meter (No. 10) onto Main Frame (No. 1).
The replacement is complete!
NOTE: Dispose battery according to your state and regional guidelines.
BATTERY REPLACEMENT
PLASTIC CAP
10
BATTERY
LR44
49
WIRE CONNECTION POINT
9
PLASTIC CAP
BATTERY SEAT