Nightlight - Philips AVENT SCD630 Bedienungsanleitung

ECO
ECO
1
ECO 20°C

Nightlight

1 Press the mode button on the side of the parent unit to switch to ECO
mode.
Note: When the display is on, the selected mode will be visible in the
status bar. The status bar is not visible when the display is off.
When the ECO mode is activated the display and sound of the parent unit
switch off when no sound is detected for 20 seconds. The ECO light lights
up green to indicate that the ECO mode is activated. During ECO mode the
display and sound transmissions are turned off.
When sound is picked up by the baby unit, the display and sound of the
parent unit switch on immediately. The sounds are transmitted to the parent
unit and the sound level lights light up green. As long as no sound is
detected, the sound level lights are off.
Note: The minimum sound level to activate sound and display is defined by
the sensitivity setting.
1 Press the nightlight on/off button on the baby unit to switch on the
nightlight feature.
The nightlight of the baby unit goes on.
Note: It is not possible to control the nightlight from the parent unit. You
can only switch the nightlight on or off on the baby unit.
17
English