Herunterladen Diese Seite drucken

Spektrum AR7110 Bedienungsanleitung Seite 6

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

EN
AR7110/AR7110R User Guide
Spektrum AR7110 series receivers offer the ultimate system for high-performance
nitro or 500-class and larger electric helicopters. Combining the bullet proof radio
link of Spektrum DSM2 technology with a built-in regulator for the Rudder, Aux2,
Gear and Throttle channels and an integrated RevLimit limiter (AR7110R only), the
AR7110 series receivers make installation of these normally complex devices clean
and simple.
The AR7110 features a Fail-On soft switch to ensure reliability and heavy 16AWG
low resistance input power leads for uninterrupted power even under the most
demanding high-current draw applications. The newly developed backplate rpm
sensor makes this integrated receiver, limiter and regulator system the easiest and
neatest possible to install with only one external rpm sensor lead for the limiter.
Designed and developed by helicopter experts, the all-in-one integrated design
of the AR7110 takes the hassle out of installing and properly setting up separate
receivers, regulators and limiters.
The AR7110/AR7110R full range 7-channel receiver features DSM
and is compatible with all Spektrum™ and JR
and DSMX technology including: JR12X, 11X, X9503, X9303, Spektrum DX8,
DX7, DX6i, DX5e and Module Systems.
NOTICE: The AR7110/AR7110R receiver is not compatible with the Spektrum DX6
parkflyer transmitter.
Features
• Regulated 5.2-voltage output to the Rudder, Gear, Aux 2 and Throttle channels
allowing the cyclic servos to be powered at high voltage for increased
performance while the gyro and throttle servos are powered by the necessary
compatible lower voltage (5.2V).
• AR7110R incorporates an integrated RevLimit limiter with backplate rpm sensor
offering the cleanest, easiest installation available.
• Easy-to-mount backplate RevLimit rpm sensor—with a single lead that plugs
into the receiver, eliminates the hassle of mounting magnets and brackets as is
the case for typical rpm sensors.
• Heavy-duty 16AWG input leads pre-wired with EC3 connector.
• Dual outputs on the Throttle and Aux 2 channels (regulated to 5.2 volts/
unregulated).
• One internal receiver and up to two remote receivers.
• Soft switch fails-on if the switch is damaged.
• Optional charge ON/OFF adaptor lead (included) allows charging, battery
monitoring and ON/OFF through one easily accessible lead.
• Two types of failsafe—SmartSafe (throttle only) and conventional failsafe (all
servos).
• QuickConnect - If a power interruption (brown out) occurs the system
reconnects in less than .25 seconds.
• Flight Log compatible.
•Compatible with all Spektrum and JR DSM2 full range radio systems.
• 2048 Resolution
aircraft radios that support DSM2
®
6
technology
®

Werbung

loading

Diese Anleitung auch für:

Ar7110r