Grundig GEKW19400DX Bedienungsanleitung Seite 18

Placing the wire grill on the cooking
shelves
It is crucial to place the wire grill on the
wire side shelves properly. While placing
the wire grill on the desired shelf, the open
section must be on the front. For better
cooking, the wire grill must be secured on
the wire shelf's stopping point. It must not
pass over the stopping point to contact
with the rear wall of the oven.
On models with wire shelves :
On models without wire shelves :
It is crucial to place the wire grill on the
side shelves properly. The wire grill has
one direction when placing it on the shelf.
While placing the wire grill on the desired
shelf, the open section must be on the
front.
Placing the tray on the cooking shelves
It is also crucial to place the trays on the
wire side shelves properly. While placing
the tray on the desired shelf, its side de-
signed for holding must be on the front.
For better cooking, the tray must be se-
cured on the stopping socket on the wire
shelf. It must not pass over the stopping
socket to contact with the rear wall of the
oven.
Stopping function of the wire grill
There is a stopping function to prevent the
wire grill from tipping out of the wire shelf.
With this function, you can easily and
safely take out your food. While removing
the wire grill, you can pull it forward until it
reaches the stopping point. You must pass
over this point to remove it completely.
On models with wire shelves :
On models without wire shelves :
Tray stopping function
There is also a stopping function to pre-
vent the tray from tipping out of the wire
shelf. While removing the tray, release it
from the rear stopping socket and pull it
towards yourself until it reaches the front
side. You must pass over this stopping
socket to remove it completely.
EN / 18
EN
DE