OSRAM e:cue SYMPL dmx Node Installationsanleitung Seite 22

Firmware Update
Exit the Test mode by leaving the Test mode page, e.g. go to "Dashboard",
or by double-pressing the Identify button.
7 Firmware Update
To update the SYMPL dmx Node, a connection of the SYMPL dmx Node to
SYMPHOLIGHT is required.
Updating with SYMPHOLIGHT
Use the usual update options in the Device Tree of the Setup tab in
SYMPHOLIGHT: select "Update firmware" in the context menu of the
SYMPL dmx Node or click the Update button
8 Dismounting
Disconnect all attached cables. Dismount the e:cue SYMPL dmx Node
from the rail by pulling the black DIN rail handle and unhitching the SYMPL
Node. The dismounting is completed.
Before dismounting, appropriate measures must be taken to
!
protect the respective components against damage caused
by electrostatic discharge (ESD protection).
9 Product specifications
Product number
Dimensions (W x H x D)
Weight
22
AB444180035
53.5 x 90.5 x 62 mm
0.76 x 0.30 x 0.20 in
(without fastening clip)
100 g
in the head toolbar.