OSRAM e:cue SYMPL dmx Node Installationsanleitung Seite 13

3.5 Disposal
The proper disposal of packing materials and of the device is the
responsibility of the respective user and for his account; in all other matters,
the retrieval obligation for packing materials and the device is subject to the
statutory regulations.
Batteries and technical appliances must not be disposed of
with domestic waste, but should be handed in at the
appropriate collection and disposal points.
3.6 Support
In case of technical problems or questions regarding installation and repair
please contact:
OSRAM GmbH
Customer Service
Karl-Schurz-Str. 38
33100 Paderborn, Germany
+49 (5251) 54648-0
support@ecue.com
4 Installation
The installation of the SYMPL dmx Node consists of mounting the device,
connections to DMX devices, to e:net, and to power supply.
The sequence of cabling is not defined. Supply the SYMPL dmx Node with
power after all cabling is completed; it starts booting.
Connect cables and data only when the device is powered
!
down.
Each cable should not exceed a length of 30 m.
!
Installation
13