AC Schnitzer 5111 287 310 Montageanleitung Seite 30

F it t in g In s t r u c t io n s
AC Schnitzer Front Splitter M2
2. Fitting...
Fig. 31
Guide the counter sunk bolt M6x45mm supplied
through the front hole in the fixing bracket, AC
Schnitzer front splitter, AC Schnitzer centre bracket
and standard front skirt, and secure with the
U6.4x18mm washer and M6 self-locking nut supplied.
Remove the fixing bolts on right and left which
were provisionally screwed in at step 7.
Fig. 32
Insert engine bay screening in standard front skirt and
attach on the outsides using the black fixing bolts sup-
plied.
Fig. 33
Ensure that the outer corners of the engine bay
screening are guided between the standard front skirt
and the side air guides of the standard front skirt.
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
Fitting Instructions No.: 5111 287 310 / Issue: 12.07.2017 / TSch / REV02
30
Fax -135