AC Schnitzer 5111 287 310 Montageanleitung Seite 25

F it t in g In s t r u c t io n s
AC Schnitzer Front Splitter M2
2. Fitting...
Fig. 16
Cut out standard front skirt in marked area, analo-
gous the AC Schnitzer front splitter, using an air saw
or similar.
Attention !
Do not damage the AC Schnitzer front splitter.
Fig. 17
Remove both air guide (1), right and left, of the
standart front skirt. To do this, unscrew the AC
Schnitzer front splitter at the side attachment point,
unclip 3 clips of the air guide. Then unclip the air
guide and remove it from the rear.
Fig. 18 right & left
Cut out a Ø 30 - 40 mm hole in the marked area us-
ing a hole cutter or similar.
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
Fitting Instructions No.: 5111 287 310 / Issue: 12.07.2017 / TSch / REV02
30mm
1
25
30mm
Fax -135