AC Schnitzer 5111 287 310 Montageanleitung Seite 26

F it t in g In s t r u c t io n s
AC Schnitzer Front Splitter M2
2. Fitting...
Fig. 19 right & left
Cut the air guide at the marked as shown. Using an
air saw or similar.
Mount both air guides again. Tighten the AC
Schnitzer front splitter at the side attachment point.
Fig. 20 right & left
Attach the AC front splitter to the standard front skirt
at the outer fixing point (1) of the AC Schnitzer front
splitter using the cap-head bolt M6x35mm supplied
with the U6.4x18mm washer and U6.4x30mm wash-
er and M6 self-locking nut.
Fig. 21 right & left
Attach the AC front splitter to the standard front skirt
at the inner fixing point (1) of the AC Schnitzer front
splitter using the cap-head bolt M6x35mm supplied
with the U6.4x18mm washer and U6.4x30mm wash-
er and M6 self-locking nut.
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
Fitting Instructions No.: 5111 287 310 / Issue: 12.07.2017 / TSch / REV02
26
1
1
Fax -135