AC Schnitzer 5111 287 310 Montageanleitung Seite 29

F it t in g In s t r u c t io n s
AC Schnitzer Front Splitter M2
2. Fitting...
Fig. 28 & 29
Position the AC Schnitzer centre bracket between the
standard front skirt and the AC Schnitzer front splitter.
Attach the AC Schnitzer centre bracket to the AC
Schnitzer front splitter using the counter sunk bolt
M6x20mm supplied and U6.4x12mm washer on the
rear (1) hole of the fixing bracket and AC Schnitzer
front splitter.
Fig. 30
Drill a Ø 6.5mm hole in the AC Schnitzer centre
bracket and standard front skirt through the front (1)
hole of the fixing bracket and AC Schnitzer front split-
ter.
During drilling, align the AC Schnitzer centre
bracket straight and hold firmly.
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
Fitting Instructions No.: 5111 287 310 / Issue: 12.07.2017 / TSch / REV02
1
1
29
Fax -135