AC Schnitzer 5111 287 310 Montageanleitung Seite 24

F it t in g In s t r u c t io n s
AC Schnitzer Front Splitter M2
2. Fitting...
Fig. 13
Cut out front skirt absorber fully as shown at the
marked area, using an air saw / cutter blade or simi-
lar. ~ 30mm deep.
Fig. 14
Cut out the engine bay screening in the marked area
using an air saw or similar. 35mm wide / 40mm deep.
Remove hose of headlamp washer system from
bracket and lay aside.
Fig. 15
Cut out the air guide in the marked area using an air
saw or similar. 35mm wide / 40mm deep.
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
Fitting Instructions No.: 5111 287 310 / Issue: 12.07.2017 / TSch / REV02
40mm
17,5mm
24
30mm
17,5mm
40mm
40mm
35mm
Fax -135