AC Schnitzer 5111 287 310 Montageanleitung Seite 18

G e n e r a l N o t e s !
AC Schnitzer Front Splitter M2
Important Notes!
These Fitting Instructions must be read in full before beginning installation work. AC Schnitzer bears no liability for
damage caused by incorrect installation!
These Fitting Instructions are intended solely for use by authorised AC Schnitzer dealers.
These Fitting Instructions are in all cases directed at professionals trained in BMW vehicles who have the corre-
sponding specialist knowledge.
All diagrams show LHD vehicles, for RHD vehicles proceed accordingly or follow separate Fitting Instructions.
Fitting
Carry out all work in accordance with applicable safety regulations (e.g. wear safety goggles).
Painting
Paint the AC Schnitzer fitting adapter and AC Schnitzer centre bracket in body colour before fitting.
Painting Instructions and corresponding notes and recommendations are attached at the end of these Fitting Instruc-
tions (see Contents). The instructions of the paint manufacturer must be observed!
Fitting Time (1 unit = 5 minutes)
The fitting time is around 24 units, which may vary depending on vehicle condition and equipment level.
Painting Time (1 unit = 5 minutes)
The painting time is around 12 units, which may vary depending on component composition.
Tools Required
Masking tape
Various socket T-wrenches
Cutter, air saw or similar
Cordless drill with various bits
Various hex spanners and Allen keys
Reversing ratchet with extension and various sockets
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
Fitting Instructions No.: 5111 287 310 / Issue: 12.07.2017 / TSch / REV02
18
Fax -135