AC Schnitzer 5111 287 310 Montageanleitung Seite 28

F it t in g In s t r u c t io n s
AC Schnitzer Front Splitter M2
2. Fitting...
Fig. 25
Drill a Ø 6.5mm hole in the standard front skirt
through the lower hole in the fixing bracket.
Fig. 26
From the outside of the standard front skirt, attach the
fixing bracket to the lower fixing bore using the cap-
head bolt M6x20mm supplied, the U6.4x18mm
washer and U6.4x12mm washer and M6 self-locking
nut.
Unscrew the provisionally upper cap-head bolt.
Refit registration plate holder.
Fig. 27
Secure the AC Schnitzer fixing bracket from the out-
side of the standard front skirt, using the cap-head
bolt M6x25mm and washer U6.4x12mm through the
upper hole in the registration plate holder, and se-
cure with the M6 self-locking nut and U6.4x12mm
washer.
AC Schnitzer - automobile Technik - Neuenhofstraße 160 - D - 52078 Aachen - Tel. 0241/5688 -130
Fitting Instructions No.: 5111 287 310 / Issue: 12.07.2017 / TSch / REV02
28
Fax -135