OSOTEK HotWave Bedienungsanleitung Seite 22

Steps to Remove the Battery
The lithium-ion battery pack contains substances that are hazardous to the environment. Before disposing of the vacuum-mop, please first remove the battery pack, then
discard, or recycle it in accordance with local laws and regulations of the country or region it is used in.
The information is applicable only for disposing of this product and is not part of the regular operating instructions.
1. To remove the handle, insert a screwdriver into the hole on the back of the vacuum to press the handle release button, and simultaneously pull the handle upwards vertically.
2. Remove the dirty water tank and use a screwdriver to unscrew the rear shell of the vacuum.
3. Remove the rear shell, and unplug the battery to remove it.
CAUTION:
• Remove the entire battery pack together, and make sure not to damage the outer casing of the battery pack to prevent short-circuiting or leakage of harmful substances.
• In the event of a battery leak, avoid contact with the liquid. If the liquid enters the eyes, rinse with plenty of water and seek medical attention immediately.
• The battery should not be removed by non-professionals. Otherwise, it may lead to a short circuit or other risks. It is recommended to send the product to the professional
after-sales service team or a government-approved recycling facility for removal.
Warrant Information
The warranty period depends on the laws of the country in which the product is sold, and the warranty is the responsibility of the seller.
The warranty only covers defects in material or workmanship.
The repairs under warranty may only be carried out by an authorized service center.
When making a claim under the warranty, the original bill of purchase (with purchase date) must be submitted.
The warranty will not apply in cases of:
i. Failures caused by:
1) Use of a OSOTEK product which is not in accordance with the "Usage Restrictions" in the User Manual.
2) Use of a OSOTEK product for cleaning white ashes, sand and other non-household garbage.
3) Use of a OSOTEK product for decoration, ornament or cleaning in a commercial environment.
4) Use of a OSOTEK product for cleaning in an environment with special adsorption chemicals, metal or other microparticles.
5) Use of a OSOTEK product in an environment with corrosive objects.
6) Use of a OSOTEK product in an improper voltage supply environment.
ii. The product you purchased is a prototype, the model or SN of which does not follow the SN coding rule for a brand-new complete machine.
Please consult us for any unclear terms.
e-mail: support-global@osotek.com
21