OSOTEK HotWave Bedienungsanleitung Seite 14

2. Pull the filter and the dust compartment upwards to remove them, and empty
the dirty water out of the tank.
Note:
When removing the dust compartment, do not press the dirty water tank
release button to prevent waste from falling out.
3. Press the dirty water tank release button to empty the dust compartment.
4. Rinse the dirty water tank, the dust compartment, and the filter with tap water
until they are clean.
Notes:
• Put the filter into the accessory compartment to dry it after each clean.
• The cleaning brush can be used to assist in cleaning.
13