OSOTEK HotWave Bedienungsanleitung Seite 17

Cleaning the Floor Brush
1. Pull the roller brushbar cover release button outwards to take out the roller
brushbar cover, and remove the roller brushbar upwards.
2. Rotate the handle of the cleaning brush to remove the blade. Use the blade to
cut the hair tangled on the roller brushbar.
3. Use tap water to rinse the roller brushbar and its cover until they are clean.
Note:
Do not rinse the floor brush directly.
4. Use a dry cloth or paper towel to remove the hair, dirt, and foreign objects
blocked at the suction port.
16