Herunterladen Diese Seite drucken

OSOTEK HotWave Bedienungsanleitung Seite 2

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 66
Safety Instructions
This product is for household use only. Read this manual carefully before use, and retain it for future reference.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be made by children without supervision.
• This appliance contains batteries that are only replaceable by skilled persons.
• The appliance is only to be used with the power supply unit provided with the appliance.
• This vacuum is for indoor use only. Do not use or install it in outdoor, industrial, or commercial environments. Do not use the base station in humid environments such as
bathrooms.
• Do not touch the plug or any part of the vacuum with wet hands.
• A hazard may occur if the appliance runs over the supply cord.
• The plug must be removed from the socket-outlet before cleaning or maintaining the appliance.
• If the power cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.
• To reduce the risk of fire, explosion, or personal injury, check before use to make sure the lithium battery and power cord are undamaged. Do not use the vacuum if either
the lithium battery or power cord is damaged.
• The main body and the floor brush of the vacuum are electrically conductive and should not be immersed in water or other liquids.
• Clean the dirty water tank in time to avoid the decrease of suction and overheating of the motor caused by obstruction. Otherwise, the service life of the vacuum may be
affected. Do not use the vacuum if the roller brushbar, the dirty water tank, and the filter are not installed in place.
• Do not lift the vacuum when adding water to it at the base station.
• Make sure to turn off the vacuum before replacing the roller brushbar.
• Neither use the vacuum to pick up flammable or explosive liquids such as gasoline, nor other liquids such as water or toxic liquids like bleach, ammonia, and drain cleaners.
• Do not use the vacuum to clean up toner used in laser printers and copiers, as toner may cause fire or explosion.
• Do not use the vacuum to pick up smoking or burning materials such as charcoal, cigarette butts, or matches.
• Do not use the vacuum to pick up sharp or hard objects, such as glass, nails, screws, or coins, which may damage the vacuum.
• Do not use the vacuum to clean stains of thick oily substances, strong adhesives, or dyes, such as shoe polish, paints, and pigments.
• Keep hair, loose clothing, fingers, and other parts of the body away from the vacuum's openings and moving parts.
• Do not put any object into the vacuum's openings, nor use the vacuum with any opening blocked. Keep free of dust, lint, hair, or other items which may reduce airflow.
• Do not shake the vacuum up and down or hit it violently to prevent dirty water from flowing into the motor.
• Do not lift or move the vacuum while the motor is operating, nor tilt it to one side or lay it flat to prevent dirty water from entering the motor.
• Do not place the vacuum on unstable surfaces such as chairs or tables to prevent damage or personal injury caused by its falling off. If the vacuum malfunctions because
of being knocked over or damaged, please contact the authorized service department. Never attempt to disassemble the vacuum on your own.
• Do not block the drying air outlet on the base station to avoid malfunctions.
• After washing the cleaning tray and the accessory container clean, thoroughly dry them before reinstalling them to the base station.
• After cleaning the roller brushbar, the filter, and the cleaning brush, thoroughly dry them before putting them into the accessory container to prevent odors.
• Do not rinse the base station with water.
• Use clean tap water when adding water to the water tank of the base station.
1

Werbung

loading

Verwandte Produkte für OSOTEK HotWave