OSOTEK HotWave Bedienungsanleitung Seite 13

Drying the Accessories
1. Press the accessory drying button to enable/disable the accessory drying
function.
2. During drying, the LED indicator will breathe white and go out when the drying
is completed.
3. To prevent odors, clean the roller brushbar, the filter, and the cleaning brush and
thoroughly dry them before putting them back in the accessory compartment.
Note:
The accessory drying function is for drying the filter and the cleaning brush. To
dry the roller brushbar, use the drying function of the self-cleaning.
Cleaning the Dirty Water Tank
1. To remove the dirty water tank, press the release button on the dirty water tank
and simultaneously pull the dirty water tank outwards.
12